Fiber cement technical support

General guidance for receiving, handling and caring for fiber cement boards. Follow the instructions for your specific product, tools and local site requirements.

Download the English support guide

Before work

Check the product, thickness, finish and batch. Inspect the delivery, document damage and review product and tool instructions. Prepare a level work area with adequate lighting, handling equipment and dust controls.

Delivery and storage

Store boards flat on a level, evenly supported pallet or rack. Protect them from rain, standing water, mud and contamination. Follow the supplier’s packaging instructions to avoid trapping moisture. Record wet wrapping, stains or damage with the batch and pallet details.

Handling on site

Lift boards clear of the stack and support their full length. Use enough people or suitable lifting equipment for the size and weight. Avoid dragging, dropping, twisting or leaving board ends unsupported.

Cutting, drilling and dust control

Use the tools and blades specified for the board and keep it dry during cutting or drilling. Work in a designated, well-ventilated area with suitable dust extraction. Follow product, tool and local safety requirements for respiratory, eye and hearing protection. Keep others clear and use a suitable vacuum or wet-cleaning method instead of dry sweeping.

Cleaning and maintenance

Start with clean water and a soft cloth or brush. If the finish permits mild detergent, test it on a small hidden area and rinse well. Confirm suitability before using pressure washing, solvents, abrasives or chemical cleaners. Inspect surfaces, fixings, joints, trims and drainage openings regularly.

Touch-up paint and repair

For minor damage on factory-coated panels, Click, lap or shingle cladding, check with a paint supplier about a suitable touch-up paint. Use the confirmed RAL reference where available and test a small area. Ask a coating contractor about larger repairs or multiple boards. Finish and weathering affect the match. For color-through boards and decking, ask for separate product guidance.

Product-specific documents

For installation drawings, fixing details or a reaction-to-fire classification, share the exact product, thickness, finish, intended assembly and destination. Ask which documents cover that combination.

Plan your technical document request

Confirm the details before installation

Tell us which board you selected, where it will be used and what guidance you need.

Request technical information

Tell us about your project.

Share your project requirements and contact details with our team.

Have a quick question? Email our team directly.