Material guides
How to calculate fiber cement cladding coverage
Estimate plank quantities using installed cover width, then adjust the order for openings, courses, cuts and usable offcuts.
A catalogue lists the physical size of a board. For a quantity estimate, use the width that each board covers once fitted. Ask for that figure for the exact profile before pricing your project.
Start with the installed cover width
For lap cladding, the upper course covers part of the board below it. For Click cladding, use the installed cover width confirmed for the interlocking profile. Shingles have their own exposure and staggering rules. Check product dimensions in the specification table and confirm installation dimensions separately.
Work through an example
Suppose a 3.00 m plank has a confirmed installed cover of 0.17 m. One full plank then covers 0.51 m². An uninterrupted 20 m² elevation would need at least 40 planks by area, rounded up from 20 ÷ 0.51. These figures are illustrative and do not describe an Ecobetek SKU.
Use the estimate to compare options. For the order, draw the actual courses, count the lengths required between openings and check whether offcuts can be reused without putting joints in the wrong place. Include any cuts for corners, starter details and penetrations.
Send a takeoff with the quote request
List the profile, wall areas, planned orientation, confirmed cover width and board lengths. State whether your quantity already includes cuts or spares. If you are still working from area alone, share the drawings and distinguish the preliminary estimate from the quantity you want quoted. Use the inquiry worksheet or send your project details.
